Searched for "Alpine INE W920R". Displaying results 71 to 80 of 205.

This camera adapter allows you to connect any kind of 3rd party camera with RCA connector to an Alpine system with Alpine Direct Camera Input.

This installation kit allows an easy and clean install of the Alpine Halo11 (iLX-F115D), Halo9 (iLX-F905D, iLX-F903D) oder Alpine Halo9 Navi (INE-F904D / INE-F904DC) in a Volkswagen Crafter from model year 2017.

The KIT-F9VW-CRA includes a custom-fit frame and installation brackets (no cable harness or interface).

Depending on the vehicle configuration you will additionally require the following interface:

• for Crafters with radio preparation you need the APF-X300VW
• for Crafters with original radio you need the APF-X310MIB / APF-X320MIB

The optional interfaces allow usage of the steering wheel remote control buttons and retention of the car menu setup through your Alpine system.

This installation kit allows an easy and clean install of the iLX-702D, INE-W710D or INE-W720D in an Alfa Romeo Mito (955) from model year 2008 – 2018.

The KIT-7AR-Mito includes a custom-fit 2DIN frame, wiring harness with CAN interface and an antenna adapter. The CAN interface allows usage of the steering wheel remote control buttons and retention of the car menu setup through your Alpine system. Also it includes an adapter that connects the original USB / AUX port in the dashboard with your Alpine system to maintain these useful connectors.

This installation kit allows an easy and clean install of theAlpine Halo11 (iLX-F115D), Halo9 (iLX-F905D, iLX-F903D) or Alpine Halo9 Navi (INE-F904D / INE-F904DC) in a Fiat 500 / Abarth (312 – before facelift) until model year 2015.

The KIT-F9FI-312 includes a custom-fit 1DIN frame, wiring harness with CAN interface and an antenna adapter. The CAN interface allows usage of the steering wheel remote control buttons with Halo9.

Available in 3 different color variations:

• Black: KIT-F9FI-312B
• Grey: KIT-F9FI-312G
• Ivory: KIT-F9FI-312I

This 9-inch installation kit allows a perfect installation of an Alpine Halo 9 (IlX-F903D) or Alpine Halo 9 Navi (INE-F904D) in your Jeep Compass model year 2017 or newer.

The kit includes all necessary parts, such as a vehicle interface that allows the Alpine head unit to communicate with the vehicle’s electronics, as well as all needed antenna adapters for DAB & AM/FM radio and a USB connectivity kit.

This kit in combination with an Alpine Halo 9 can be used to replace the original 5”, 7” or 8,4” Jeep radio.

The installation kit KIT-HALO-TRA7S lets you perfectly integrate a 1DIN Alpine Halo system with 9-inch or 11-inch screen (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D) into a Ford Transit Custom (model year 2018 ->). The kit also enables ±10° horizontal monitor swivel of your Alpine unit.
The KIT-HALO-TRA7S includes a CAN to UART interface featuring support of the steering wheel remote control buttons (latest data protocol including SIRI and OK Google support). It also includes a plug-and-play wiring harness to easily connect your Alpine unit to the Ford vehicle, a camera cable adapter (Alpine direct – RCA), an antenna adapter and a USB adapter. The wiring harness allows for easy access to ignition, speed signal and reversing signal from the CAN bus.
You can even retain the vehicle settings function in the Alpine head unit and includes the convenient “Preflight-Check” function for motorhome drivers.

Note:

• The KIT-HALO-TRA7S is only compatible with vehicles featuring original Ford 1DIN radio (model T15114A) or radio preparation. For Vehicle featuring the original Ford navigation system the original Ford 1-DIN Trim Panel is needed. Please ask your dealer.
• Vehicles with original radio and e-call system: the e-call system remains functional, but in some cases an error message may be displayed (vehicles with radio preparation will not encounter this problem).

The installation kit KIT-HALO-DU8S lets you perfectly integrate a 1DIN Alpine Halo system with capacitive WXGA 9-inch or 11-inch screen into the Fiat Ducato III Version 8.

The KIT-HALO-DU8S enables ±10° horizontal monitor swivel of your Alpine unit (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D).

If your Ducato is already equipped with an original Qi phone charger, you can continue to use it with your Alpine system. This requires the separately sold KWE-Qi-DU8 adapter.

This KIT also supports all buttons of the Ducato’s steering wheel controls, including the telephone (accept / decline) keys.

The included CAN-Bus interface offers several user adjustments, such as setting your Alpine Halo system to already turn on when you open the driver’s door, adjust reversing camera delays and others.

Note:

• the KIT-HALO-DU8S is only compatible with vehicles featuring radio preparation or open dash (no radio equipped).

Alpine introduces the 3rd generation motorhome Alpine Style system for the Fiat Ducato III, Citroën Jumper II and Peugeot Boxer II. The X903D-DU2 features a huge 9-inch touch-screen with swivel function, that allows the screen to be turn towards the driver or co-driver. This makes it very easy to see and control navigation maps and other functions.

The 3rd generation includes new rotary encoders for easy volume control and radio station search, as well as a direct camera access button. We also improved the wiring harness to make installation easier and much faster.

The X903D-DU2 features the iGo Primo NextGen navigation system with TomTom maps pre-installed for 48 countries with 3 years free-of-charge map updates. You can now chose from 3 different motorhome profiles (sizes: S / M / L) or manually input the measurements and weight of your motorhome. This means only suitable routes for your specific motorhome will be proposed. You can also easily install additional camper databases for your camping needs. The X903D-DU2 also includes Apple CarPlay and Android Auto compatibility.

The APF-X305DU8-OE is the latest generation of Alpine interfaces for the Fiat Ducato 8 (from Model year 2022) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus and retain all vehicle setup functions and other important features such as the parking sensors display.

It includes a complete plug-and-play wiring harness for adaptation to the original Fiat connectors. It also includes an antenna adapter cable with phantom feed.

Note:

• the APF-X305DU8-OE is only compatible with vehicles with 5-inch/7-inch/10-inch original radio and 3.5-inch/7-inch instrument cluster installed.

More bass with less space - Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application.
Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600 Watts RMS and 1800 Watts max. Moreover, with its bespoke cast aluminum frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance.
Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound.
What’s more, the optional mesh grille KTE-RS10G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves.