Searched for "x-w10". Displaying results 71 to 80 of 272.

Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.

The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four channel and five channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.

Achieving a perfectly integrated, high-performance car audio installation with only one device is now possible with the new Alpine PWD-X5.

This very unique sound system upgrade product includes a high-performance Digital Sound Processor (DSP), 4-channel amplifier for your front and rear door speakers, as well as an ultra-flat active subwoofer. The small footprint allows the PWD-X5 to be easily installed inside the car’s cabin to enjoy a nice bass upgrade. Connect either OEM radios via high-power speaker level inputs or aftermarket radio via RCA inputs, and control the system through the wired remote control and the convenient smartphone app.

This product is perfect for customers that look for a big improvement of their car’s sound quality, without installing many different devices and routing cables all across their car. The PWD-X5 comes with a full wiring kit including high-qulaity power cables (4.5 meters) with main fuse.

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extremely flexible: all components can be purchased and used in “stand-alone” configuration.

The HDP-D90 DSP Amplifier has a 192kHz/32Bit internal sampling rate and an ultra-wide audio bandwidth of 10Hz-110kHz to reproduce sound at its intended high-resolution spec. Intentional designs, like a copper-plated chassis, bring the signal-to-noise ratio up to >110dB and minimize noise and distortion during playback. Drawing inspiration from the internal Master Clock Management System in the AlpineF#1Status DSP, the HDP-D90 contains a Crystal Oscillator Clock Generator at the core of the unit that tracks and aligns digital information to eliminate jitter (timing errors) and accurately reproduce sound.

The DSP has multiple input options for flexible system building. For vehicles that are unable to replace the factory Head Unit, the DSP has 12-channels of high-level inputs that allow the factory Head Unit to be retained. The DSP amp also has an optical input to add the Alpine Status HDS-990 Media Player or analog inputs for another aftermarket Head Unit. The HDP-D90 (when used in stand-alone mode) can also receive music sent directly from a smartphone with Bluetooth wireless streaming.

While the HDP-D90 has 12-channels of amplification (8x 50W x 4x 80W) and can be used to power an entire system, 10-channels of RCA output can be used to add Alpine Status amplifiers for more power or system building.

Alpine's redesigned next-generation S-Series subwoofers apply technology from our higher end subs to bring you the depth and punch that'll make your tunes come alive. With high-tech materials and Alpine know-how, these subs deliver the lows you crave at a budget-friendly price.

The S2-W8D2 20cm (8") sub handles up to 300 Watts RMS, so you can drive it hard without any worries. The redesigned cone combines carbon fiber and polypropylene for light weight and sturdiness, while its rubber High Amplitude Multi-Roll (HAMR) surround enables maximum excursion for impressive performance. Handy jumpers make it simple to switch from 2Ohm to 8Ohm impedance to adapt to your system. This sub is equally suited for ported and sealed boxes, so you can enjoy your bass big and boomy or tight and precise.

Superior Sound Performance

Alpine Introduces the all-new Alpine Status sound system: using the same engineering and design concepts drawn from the third generation, Ultra High-Resolution AlpineF#1Status system, Alpine created “Alpine Status” to achieve High-Resolution Sound at a more approachable and accessible price point. The Alpine Status system is also extreme flexible: all components can be purchased and used in “stand-alone” configuration.

If you want to build a full Alpine Status sound system with external amplifiers, we recommend the Alpine Status Class-D amplifiers. These amps are developed to perfectly match the Alpine Status speakers and subwoofer for best sound quality. There is a Mono power amplifier (HDA-M80), a 4-channel amplifier (HDA-F60) and a 5-channel amplifier (HDA-V90) with a dedicated high-power subwoofer channel.

All controls are conveniently located on the top side of the amplifiers, protected by a cover plate. This gives you easy access to HP / LP filters and frequency adjustments, gain controls and input channel selectors (different for each amplifier model).

Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.

The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four channel and five channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.

Upgrade your motorhome or camper van with the HCS-T100 Alpine 360° camera system and get an excellent overview while parking or maneuvering your vehicle.

The new system includes 4 HD cameras with silver brackets, the main control unit and all required cables to complete the installation.

When used with an Alpine touch-screen, you can simply touch-control the camera settings right from Head Unit (feature will be enabled after software update in summer 2023). It is also compatible with 3rd party displays (analog video signal and control via remote control).

You can further expand the system with up to 4 additional cameras: check on your pets traveling with you in the back of the motorhome, keep an eye on the grey-water disposal or even height clearance with narrow bridges. There are several add-on cameras available to chose from.

Get maximum overview using Top-View and even use split-screen setting to show 2 camera angles at once. The system also fully eliminates any blind spots when turning to prevent accidents.

Даний кабель потрібен для підключення Вашого iPod або iPhone до  INE-W977BT, INE-W970BT,  INE-W928R, INE-W925R, INE-W920R, IVE-W530E, IVE-W535BT, IVE-W530BT, ICS-X8, ICS-X7, IVA-D511R, IVA-D511RB та IVA-D800R, а також для забезпечення відтворення відео.

2м подовжувальний кабель входить до комплекту.