Searched for "Alpine iLX-107". Displaying results 41 to 50 of 103.

The installation kit KIT-7FI-DU8 lets you perfectly integrate an Alpine 2DIN navigation or media system in the Fiat Ducato III Version 8. It is compatible with the Alpine INE-W611D / INE-W611DC, iLX-705D, iLX-W690D and INE-W720D / INE-W720DC.

It includes all metal brackets and screws, a plug-and-play wiring harness and a steering wheel remote control interface for perfect installation, as well as a 2DIN plastic trim plate for a clean integration in your dashboard.

If your Ducato is equipped with an original Qi phone charger, you can continue to use it with your Alpine system. This requires the separately sold KWE-QI-DU8 adapter.

Note:
the KIT-7FI-DU8 is only compatible with vehicles featuring radio preparation or open dash (no radio equipped).

The LIN Bus Adapter KWE-Qi-DU8 allows you to use the original Fiat Ducato 8 Qi phone charger with your Alpine system.

Compatible Cars

If you have problems with sunlight glare or fingerprints on your Alpine Halo9 display, the KTX-HF9 is the perfect solution for you. This self-adhesive film can be easily applied to the display of the iLX-F903D or INE-F904D / INE-F904DC. It highly improves visibility of your display by reducing sunlight reflections and finger prints. It also improves the overall picture contrast and protects your screen from scratches.

The KTX-HF9 is especially recommended for motorhome drivers using a Halo9 system, due the high location of the display in the dashboard.

This installation kit allows an easy and clean install of the Alpine  iLX-702DM in a Fiat 500 / Abarth (312MCA – after facelift) from model year 2015.

The KIT-7FI-500FL includes a glossy-black custom-fit 2DIN frame, wiring harness with CAN interface and an antenna adapter. The CAN interface allows usage of the steering wheel remote control buttons and retention of the car menu setup through your Alpine system. It also includes a rear camera interface that allows plug-and-play connection of the original Fiat rear camera. Also it includes an adapter that connects the original USB / AUX port in the dashboard with your Alpine system to maintain these useful connectors.

Please Note the iLX-702DM is a modification of the regular iLX-702D. The 1DIN chassis is fit to its upper position on the back, for easy installation into your Fiat.

The 7”  Digital Media Station iLX-702D / iLX-702DM, features DAB+, HDMI, Apple CarPlay and Android Auto compatibility

The installation kit KIT-HALO-DU8S lets you perfectly integrate a 1DIN Alpine Halo system with capacitive WXGA 9-inch or 11-inch screen into the Fiat Ducato III Version 8.

The KIT-HALO-DU8S enables ±10° horizontal monitor swivel of your Alpine unit (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D).

If your Ducato is already equipped with an original Qi phone charger, you can continue to use it with your Alpine system. This requires the separately sold KWE-Qi-DU8 adapter.

This KIT also supports all buttons of the Ducato’s steering wheel controls, including the telephone (accept / decline) keys.

The included CAN-Bus interface offers several user adjustments, such as setting your Alpine Halo system to already turn on when you open the driver’s door, adjust reversing camera delays and others.

Note:

• the KIT-HALO-DU8S is only compatible with vehicles featuring radio preparation or open dash (no radio equipped).

The installation kit KIT-HALO-TRA7S lets you perfectly integrate a 1DIN Alpine Halo system with 9-inch or 11-inch screen (INE-F904D, INE-F904DC, iLX-F115D, iLX-F905D) into a Ford Transit Custom (model year 2018 ->). The kit also enables ±10° horizontal monitor swivel of your Alpine unit.
The KIT-HALO-TRA7S includes a CAN to UART interface featuring support of the steering wheel remote control buttons (latest data protocol including SIRI and OK Google support). It also includes a plug-and-play wiring harness to easily connect your Alpine unit to the Ford vehicle, a camera cable adapter (Alpine direct – RCA), an antenna adapter and a USB adapter. The wiring harness allows for easy access to ignition, speed signal and reversing signal from the CAN bus.
You can even retain the vehicle settings function in the Alpine head unit and includes the convenient “Preflight-Check” function for motorhome drivers.

Note:

• The KIT-HALO-TRA7S is only compatible with vehicles featuring original Ford 1DIN radio (model T15114A) or radio preparation. For Vehicle featuring the original Ford navigation system the original Ford 1-DIN Trim Panel is needed. Please ask your dealer.
• Vehicles with original radio and e-call system: the e-call system remains functional, but in some cases an error message may be displayed (vehicles with radio preparation will not encounter this problem).

This 9-inch installation kit allows a perfect installation of an Alpine Halo 9 (IlX-F903D) or Alpine Halo 9 Navi (INE-F904D) in your Jeep Compass model year 2017 or newer.

The kit includes all necessary parts, such as a vehicle interface that allows the Alpine head unit to communicate with the vehicle’s electronics, as well as all needed antenna adapters for DAB & AM/FM radio and a USB connectivity kit.

This kit in combination with an Alpine Halo 9 can be used to replace the original 5”, 7” or 8,4” Jeep radio.

This installation kit allows an easy and clean install of the iLX-702D, INE-W710D or INE-W720D in an Alfa Romeo Mito (955) from model year 2008 – 2018.

The KIT-7AR-Mito includes a custom-fit 2DIN frame, wiring harness with CAN interface and an antenna adapter. The CAN interface allows usage of the steering wheel remote control buttons and retention of the car menu setup through your Alpine system. Also it includes an adapter that connects the original USB / AUX port in the dashboard with your Alpine system to maintain these useful connectors.

Bring exciting bass to your vehicle with the SWC-W84TRA7 

Subwoofer designed for Ford Transit 7, Transit 7 Custom and Tourneo 7 Custom.

The 180 Watt subwoofer comes pre-installed in a sealed, custom-fit wooden enclosure for installation under the passenger seat to add powerful bass to your existing sound system.

Note: a separate amplifier is required to power this subwoofer

Attention: this subwoofer kit is not compatible with the Ford Nugget or Transit 7 Custom Nugget

Upgrade your Ford Transit 7, Transit 7 Custom, Transit 7 Custom Nugget and Tourneo 7 Custom with the new SPC-106TRA7 high-end component speaker system.

This Alpine Adventure Audio system for Ford Vans perfectly unites function with form: enjoy audiophile grade sound quality, while the beautiful photo-etched stainless-steel tweeter grills simply look stunning in your A-pillars.

The High-end tweeters let you hear every note with stunning clarity and fast dynamics, while the 16,5 cm mid-range door speakers produce a wide frequency range that uncovers the rich details of every audio track – delivering your favorite songs with powerful mid-bass and amazing texture and accuracy.

Due to the original Ford connectors and usage of the original wiring harness, installation is fast and easy.