Searched for "apf-x100". Displaying results 1 to 10 of 139.

If your Golf 7 / Octavia 3 has the Dynaudio / Canton sound system installed, you need this interface to upgrade the radio to the X903D-G7 / X902D-G7 / i902D-G7 / X903D-OC3 / X902D-OC3 / i903D-OC3. The APF-H100DY interface is connected to the MOST data bus instead of the original VW / Skoda radio and transfers analogue audio signals from the Alpine X903D-G7 / X902D-G7 / i902D-G7 / X903D-OC3 / X902D-OC3 / i903D-OC3 to digital / optical data so the Dynaudio / Canton processor will work.

Please note that the Fader function will not work.

The APF-H100DY comes with all needed cables and is ready to install.

Автомобільні виробники почали використовувати функції відображення інформації на екрані штатного головного пристрою. При заміні оригінального устаткування водії не втратять функціонал штатного устаткування і належним чином оцінять можливість зберігати ці функції. APF - V100VW - наше перше рішення, яке дозволяє  відобразити ту ж саму інформацію на екрані під час управління обігрівачем, кондиціонером або під час паркування. І усе це у поєднанні зі збереженням функції інтерфейсу дистанційного керування рульового колеса та інтерфейсом виведення інформації на дисплей автомобіля.

Для усіх пристроїв AV або AVN Alpine з функцією прямого підключення камери.

Цей інтерфейс - наше рішення, що дозволяє зберегти звукову систему HK (Harman Kardon) при заміні штатної магнітоли головним пристроєм Alpine.

Проста установка plug and play (підключи та працюй).

The APF-X320MIB is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus and retain all vehicle setup functions and other important features such as the parking sensors display. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors. There is also an adapter cable for the original USB port and a hands-free microphone connection cable included.

• Plug-and-play wiring harness for VW platform vehicles
• CAN-bus interface for latest generation of vehicles
• Display of air condition / heater settings on Alpine screen
• Steering wheel remote control retention
• Car setup menu display and control on Alpine screen
• Support of Multi-Function Display (MFD) in instrument cluster
• Parking sensor display and rear camera connectivity
• Pre-flight Check for Camper Vans
• Original hands-free microphone adaptation
• Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

This interface allows connection of our latest generation Alpine display units to the Audi A3 (8P/8PA) and Audi TT (8J) electronics.

This makes installation much easier and allows usage of the steering wheel control buttons and vehicle information display with your Alpine product.

The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors.

• Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles
• CAN-bus interface for latest generation of vehicles
• Display of air condition / heater settings on Alpine screen
• Steering wheel remote control retention
• Support of Multi-Function Display (MFD) in instrument cluster
• Parking sensor display and rear camera connectivity
• Pre-flight Check for Camper Vans
• Original hands-free microphone adaptation
• Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality

Retain Steering Wheel and Vehicle Display Functions and Parking/Heating Visualisation

While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X300VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control.

The APF-X305DU8-OE is the latest generation of Alpine interfaces for the Fiat Ducato 8 (from Model year 2022) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus and retain all vehicle setup functions and other important features such as the parking sensors display.

It includes a complete plug-and-play wiring harness for adaptation to the original Fiat connectors. It also includes an antenna adapter cable with phantom feed.

Note:

• the APF-X305DU8-OE is only compatible with vehicles with 5-inch/7-inch/10-inch original radio and 3.5-inch/7-inch instrument cluster installed.

This interface allows connection of our latest generation Alpine display units (such as iLX-705D, INE-W720D, X803D-U and iLX-F905D / iLX-F115D) to the Mercedes Benz Vito's (447) electronics.

This makes installation much easier and allows usage of the steering wheel control buttons and vehicle information display with your Alpine product.

Includes steering wheel remote control interface (supplies CAN to analogue conversion for ACC, parking brake, speed pulse, SIRI and OK Google support), USB / AUX port adapter, Antenna adapter and power quadlock adapter.

This interface allows connection of our latest generation Alpine display units (such as iLX-702D, INE-W720D, X803D-U and iLX-F903D) to many Mercedes vehicles as shown below in the features and specifications area.

This makes installation much easier and allows usage of the steering wheel control buttons and vehicle information display with your Alpine product.

Includes steering wheel remote control interface (supplies CAN to analogue conversion for ACC, parking brake, speed pulse, SIRI and OK Google support), Antenna adapter and power quadlock adapter.